Window - Other

1. Run dialog : regedit.
2. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters.
3. In this key, create DWORD named LmhostsTimeout and valued 4294967295 in decimal.
4. Run dialog : services.msc.
5. Change SSDP Discovery startup type to Automatic (Delayed Start).
6. Change UPnP Device Host startup type to Automatic (Delayed Start).
7. Change Function Discovery Provider Host startup type to Automatic (Delayed Start).
8. Change Function Discovery Resource Publication startup type to Automatic (Delayed Start).
9. Restart the computer.

1. Using DISKPART by running command 1.
2. Format the pen drive to make it usable.

Command 1

C:\Users\USER-PC>diskpart
DISKPART>
DISKPART> list disk
DISKPART> select disk DiskNumber
DISKPART> clean
DISKPART> create partition primary
DISKPART> exit

1. Run dialog : control printers.
2. Right Click on the Printer Icon, select Properties.
3. Go to Ports tab.
4. Select the current port.
5. Click on Configure Port....
6. Unchecked the SNMP Status Enable.
7. Click OK then Close.

1. Run dialog : control printers.
2. Remove the related printers by right-click the device and click Remove device.
3. Run dialog : printui.exe /s.
4. Go to Ports, select the related ports and delete the port by click Delete port.
5. Go to Drivers, select the related drivers and delete the driver by click Remove.
6. Choose Remove driver and driver package and click OK.
7. Go to C:\ProgramData.
8. Delete all the folder by looking for the brands name.
9. Restart the pc.
10. Install the printer and test.

Note: If the problem still exist, run dialog to temp, %temp% & prefetch and delete all the files.

1. Run dialog : devmgmt.msc.
2. Go to Network adapter, right-click the wifi adapter and click Update driver.
3. Run dialog : services.msc.
4. Change WLAN Auto config startup type to Automatic (Delayed Start).
5. Click Start.
6. Click Apply then OK.

Method 1 :

1. Go to C:\Windows\system32\.
2. Search for mscms.dll file and press Ctrl + C.
3. For 32-bit - move the file to C:\windows\system32\spool\drivers\w32x86\3\.
4. For 64-bit - move the file to C:\windows\system32\spool\drivers\3\.
5. Restart the computer.

Method 2 :

1. Run dialog : control printers.
2. Click Add a printer.
3. Click The printer that I want isn’t listed.
4. Select Add a local printer or network printer with manual settings and click Next.
5. Select Create a new port, choose Local Port and click Next.
6. Type in the \\Printer IP\Printer Name.
7. Click OK then Next .

Method 3 :

1. Run dialog : services.msc.
2. Change Print Spooler startup type to Automatic (Delayed Start).
3. Restart the services.

Method 4 :

1. Run dialog : printmanagement.msc.
2. Go to All Drivers and delete all the unused driver.
3. Try to reinstall the printer driver.

Method 5 :

1. Run dialog : services.msc.
2. Double click Print Spooler and click Stop.
3. Run dialog : regedit.msc.
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider.
5. Right click Client Side Rendering Print Provider and delete.
6. Run dialog : services.msc.
7. Double click Print Spooler and click Start.
8. Restart the computer.

Method 1 :

1. Run dialog : inetcpl.cpl.
2. Go to Connections tab.
3. Click on LAN settings button.
4. Make sure that only Automatically detect settings is checked.

Method 2 :

C:\Users\USER-PC>netsh int ip reset resetlog.txt

Please reboot your computer for these settings to take effect !!

Method 3 :

C:\Users\USER-PC>sfc /scannow
C:\Users\USER-PC>DISM /Online /Cleanup-Image /RestoreHealth

Method 4 :

1. Search for Internet Options.
2. Go to Advanced tab.
3. Click on Reset... button.
4. Check the Delete personal settings and click on Reset button.
5. Click on Restore advanced settings button.
6. Click Apply then OK.

Method 5 :

1. Search for Open Network and Sharing Center.
2. Click on Change adapter settings button.
3. Disable the network adapter and Enable back.

Method 6 :

1. Search for Open Network and Sharing Center.
2. Open the network adapter properties.
3. Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties button.
4. Select Obtain DNS server address automatically and click on OK to save changes.

Method 7 :

1. Open Settings and go to Network & Internet.
2. Go to Proxy.
3. Turn off Automatically detect settings.

Method 8 :

1. Open Settings and go to Update & Security.
2. Go to Troubleshoot.
3. Click on Network Adapter and run the troubleshooter.

Windows Defender Error 577 : Windows Could Not Start The Windows Defender Service

Method 1 :

1. Run dialog : regedit.
2. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender.
3. In this key, change DWORD named DisableAntiSpyware and valued 1 in hexadecimal.

Method 2 :

1. Search for Edit group policy.
2. Go to Computer Configuration > Administrative Templates > Windows Components > Windows Defender.
3. Double click Turn off Windows Defender.
4. Select Disabled option.
5. Click Apply then OK.

Set Windows Photo Viewer as default apps for opening image or photo.

1. Get the ZIP archive with Games from the following link: Download Windows 7 Games for Windows 8, Windows 8.1 and Windows 10.
2. Unpack and execute the Win7GamesForWin10-Setup.exe file.
3. Follow the installation wizard and select the desired games you want to get in Windows 10.
4. You are done! Go to the Start menu and play your favorite games now.
5. That's it. Now you have games from Windows 7 in Windows 10.

C:\Users\USER-PC>cd C:\
C:\netsh int tcp show global
C:\netsh int tcp set global chimney=enabled
C:\netsh int tcp set global autotuninglevel=normal
C:\netsh int tcp set global congestionprovider=ctcp
C:\netsh int tcp show global

Please reboot your computer for these settings to take effect !!

1. Open Notepad and key in the command 1 below.
2. Save the file as gender.vbs.
3. Run the gender.vbs and determine the gender by hearing the voice from computer.

Command 1

CreateObject("SAPI.SpVoice").Speak"I love you"